Horrortaxi
Aug 26, 09:43 PM
Originally posted by nagromme
An interesting comparison.
Thanks. I scared myself a little because, to me anyway, it seemed dead on. Can any other switchers out there relate?
An interesting comparison.
Thanks. I scared myself a little because, to me anyway, it seemed dead on. Can any other switchers out there relate?
pmz
Jun 30, 10:16 AM
What is going on in the software dept at 1 infinite loop?
Not only is this update overdue, but its the only one of Apple's own iPhone apps to even be touched for iOS4 or the iPhone 4.
None of the Apps have been updated to a universal version with iPad support.
Oh, but Find my iPhone was critically important to have out on launch...:confused:
It's embarrassing.
I mean, what kind of example does this set for other devs? Apple expects their developers of technically completed products (apps) to be updated asap to support all of the latest features of the latest devices. Yet they themselves have half a dozen critical apps that haven't even been touched?
Not only is this update overdue, but its the only one of Apple's own iPhone apps to even be touched for iOS4 or the iPhone 4.
None of the Apps have been updated to a universal version with iPad support.
Oh, but Find my iPhone was critically important to have out on launch...:confused:
It's embarrassing.
I mean, what kind of example does this set for other devs? Apple expects their developers of technically completed products (apps) to be updated asap to support all of the latest features of the latest devices. Yet they themselves have half a dozen critical apps that haven't even been touched?
KyleGP
May 3, 10:15 PM
Yep.
She'll be going with her boyfriend and she's gonna make sure it's legit before he gets the 16g back.
If this is his mistake honestly, he's caused a lot of trouble and worry for nothing.
We will see what happens, I'm waiting his reply.
She'll be going with her boyfriend and she's gonna make sure it's legit before he gets the 16g back.
If this is his mistake honestly, he's caused a lot of trouble and worry for nothing.
We will see what happens, I'm waiting his reply.
esaleris
Mar 16, 09:02 AM
I am currently using a white Macbook (2.0 GHz / 3GB / GMA 950) from 5 years ago and it is performing admirably for most daily tasks; the only that stretches it a bit is my RAW photo editing on Lightroom 3. I process photos from my Canon EOS 60D, so we're looking at ~20MB images.
I'm thinking about getting a new machine and am considering the following. Note that I'm not concerned about the hard drive capacity, since I use external drives extensively anyway.
MacBook Air
13" / 2.13 GHz / 4 GB 1066MHz / GeForce 320M
MacBook Pro
13" / 2.7 GHz / 4 GB 1333MHz / Intel HD Graphics 3000
Sunset Wallpaper, Sky
vector cartoon background
animated desktop wallpaper
I'm thinking about getting a new machine and am considering the following. Note that I'm not concerned about the hard drive capacity, since I use external drives extensively anyway.
MacBook Air
13" / 2.13 GHz / 4 GB 1066MHz / GeForce 320M
MacBook Pro
13" / 2.7 GHz / 4 GB 1333MHz / Intel HD Graphics 3000
ortuno2k
Dec 21, 12:45 AM
Ouch!
That looks like a real messed up PB!
:eek:
That looks like a real messed up PB!
:eek:
RobertD33
Jul 9, 02:35 PM
hmm
philipma1957
Feb 14, 06:28 PM
Don't mean to hijack, but I wanted to see what your opinion of the current mini at a high resolution performs like (2560x1440)?
when I went from the 2007 2.0 with the intel gpu to a 2.26 2009 with a nvidia 9400 gpu.
i had huge eyeTv improvement in picture quality it was off the air rooftop antenna and CBS NBC ABC FOX all had better reception. Sports movies everything improved along with DVD and netflix streaming. I later upgraded to a 2.66 2009 8gb ram with a double estata hack . I use a pair of these as twin boot drives.
http://www.newegg.com/Product/Product.aspx?Item=N82E16822207017&cm_re=2tb_fantom-_-22-207-017-_-Product
Sunrise Background
Sunset scene behind monkey.
when I went from the 2007 2.0 with the intel gpu to a 2.26 2009 with a nvidia 9400 gpu.
i had huge eyeTv improvement in picture quality it was off the air rooftop antenna and CBS NBC ABC FOX all had better reception. Sports movies everything improved along with DVD and netflix streaming. I later upgraded to a 2.66 2009 8gb ram with a double estata hack . I use a pair of these as twin boot drives.
http://www.newegg.com/Product/Product.aspx?Item=N82E16822207017&cm_re=2tb_fantom-_-22-207-017-_-Product
GeeYouEye
Jul 25, 01:00 PM
e-coli, I suggest you spell-check your sig... it's your, urine, and glucose.
boxcar
Jul 6, 04:48 PM
alright... no partition!
quot;sunset cartoonquot; quot;sunset
Cartoon sunset - 3d, abstract,
islamic sunset wallpaper
Lonely sunset
science ackground wallpaper
vector cartoon background
sunset
from i cartoon sunset,
East African Sunset Wallpaper
wallpaper beach sunset. sunset
tekkierich
Feb 18, 10:55 AM
Hi Guys & Gals,
I'm going to make the jump to an Intel SSD this weekend to replace my stock 320GB (5400 RPM) Drive in the 2010 Mac Mini.
Those of you that have actually done this, did you find that the Logic Board really needed to be shifted at all? I've been looking at the OWC installation Video and it would seem to me that the drive will lift out over the Logic Board without moving the board at all. It would mean that I would only have to detach the first SATA and two heat connectors. The least amount of connectors I have to pull the better I would assume. Also, I'm thinking that the black vinyl covering wrapped around the 320GB drive is there to protect the moving/electrical drive components on the bottom of the drive, which I would not need on the SSD. I know that I need/should replace the piece of tape to hold the heat sensor wire on the new SSD.
Any help would be great.....:)
2010 Mac Mini (2.4MHz - 8GB RAM Intel 80GB SSD(pending)) Air Port Extreme, 2TB Mini Stack External Dive, 16GB WiFi iPad, 32GB iPhone 3GS.
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and no logic board to short, you probably can do away with it.
I'm going to make the jump to an Intel SSD this weekend to replace my stock 320GB (5400 RPM) Drive in the 2010 Mac Mini.
Those of you that have actually done this, did you find that the Logic Board really needed to be shifted at all? I've been looking at the OWC installation Video and it would seem to me that the drive will lift out over the Logic Board without moving the board at all. It would mean that I would only have to detach the first SATA and two heat connectors. The least amount of connectors I have to pull the better I would assume. Also, I'm thinking that the black vinyl covering wrapped around the 320GB drive is there to protect the moving/electrical drive components on the bottom of the drive, which I would not need on the SSD. I know that I need/should replace the piece of tape to hold the heat sensor wire on the new SSD.
Any help would be great.....:)
2010 Mac Mini (2.4MHz - 8GB RAM Intel 80GB SSD(pending)) Air Port Extreme, 2TB Mini Stack External Dive, 16GB WiFi iPad, 32GB iPhone 3GS.
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and no logic board to short, you probably can do away with it.
steve31
Jul 24, 10:29 PM
West Ed at 6 for me. Anyone know if we can line up outside the Apple store at 5-6 am or do they keep the mall doors shut till 7?
Shrek
Sep 17, 08:03 PM
Originally posted by sparkleytone
http://www.applele.com/hiphone_r04c.jpg
:eek: :eek: :eek:
I WOULD BUY THAT IN AN INSTANT!!! :D
http://www.applele.com/hiphone_r04c.jpg
:eek: :eek: :eek:
I WOULD BUY THAT IN AN INSTANT!!! :D
Hellhammer
May 6, 04:20 PM
How about 1080p movies in full screen mode? Does it look bad? Do you guys prefer watching it through a window at 1080p?
1080p, or even 720p should be fine. Moving picture is different because you don't concentrate in small details but try to read text in Safari at 1920x1080 and it will look pixel-ish, something that you don't want.
1080p, or even 720p should be fine. Moving picture is different because you don't concentrate in small details but try to read text in Safari at 1920x1080 and it will look pixel-ish, something that you don't want.
kellen
Jun 22, 08:01 AM
location?
sweex
Jun 11, 01:25 PM
The way I read this article is: Apple is going for that little bit more,which cost a bit more also but they know that the potential clients are willing to afford it so why wouldn't they do it? Samsung can't afford the same move so they cry out loud saying their better...
(Ok maybe it's a little exaggerated but you get the idea...)
(Ok maybe it's a little exaggerated but you get the idea...)
Daveway
Nov 15, 11:49 PM
I finished building a site using the latest RapidWeaver and it displays perfectly in Safari, but only Safari. It won't even display correctly in Firefox. I've looked through the code and can't see any problems.
Any suggestions?
www.myelixr.com
Any suggestions?
www.myelixr.com
jbomber
Jul 2, 03:00 AM
Originally posted by iJon
its coming, its called expose.
iJon
seems like it'd be relatively easy tho, y'know? kinda surprised that it was never considered til Expose.
its coming, its called expose.
iJon
seems like it'd be relatively easy tho, y'know? kinda surprised that it was never considered til Expose.
66775
Apr 27, 10:54 AM
by the way, I just ran a "fsck -fy" test and the msg was "The volume MacIntosh HD appears to be OK"
Please help :(
Please help :(
canadianipad
Jul 28, 01:51 PM
im planning on going to southgate, you think if i got there around 7 i would walkout with an iphone? are lines usually big in edmonton? im just here for holidays and thought i should get a new iphone 4. i know in toronto the store is downtown has pretty big lineups. so i was just wondering do lots of people usually line up here?
oh and also does the mall open so you can lineup at the apple store or do you have to wait outside till the mall opens?
If you show up at 7 I'm sure you'll get a phone. But just to be safe show up at 6:30.
Yes there will be a lineup. But with 2 Apple stores and all the carrier stores, I don't think the lines will be ridiculous.
For the iPad launch Southgate let people line up inside the mall. Call the mall and ask, they'll be able to tell you for sure.
oh and also does the mall open so you can lineup at the apple store or do you have to wait outside till the mall opens?
If you show up at 7 I'm sure you'll get a phone. But just to be safe show up at 6:30.
Yes there will be a lineup. But with 2 Apple stores and all the carrier stores, I don't think the lines will be ridiculous.
For the iPad launch Southgate let people line up inside the mall. Call the mall and ask, they'll be able to tell you for sure.
b-rad g
Mar 5, 04:31 PM
Been in the process of ripping and encoding my DVD collection to the Mini for about a month now. Have been using Handbrake only to do the entire process so far, and usually can only get about 3 a day after work.
Today decided to try Rip It to pre-rip a bunch and the queue them up in Handbrake so I can leave it running. The Rip It part has gone really well as I ripped 15 DVD's in a row in a matter of hours.
But now have started the encoding part, and Handbrake is crawling!:(
When I was using Handbrake for the entire process I was averaging around 30 fps. But now I have all rips queued up and the first is doing around 10 fps! What's the deal? I figured it would be faster encoding from HD instead of DVD.
Also tried to encode Hunt for Red October and it says "Suspected RCE Region 1". Is there any way to remove the region from ripped file?
Hopefully someone has been through this before and can help me out.
Today decided to try Rip It to pre-rip a bunch and the queue them up in Handbrake so I can leave it running. The Rip It part has gone really well as I ripped 15 DVD's in a row in a matter of hours.
But now have started the encoding part, and Handbrake is crawling!:(
When I was using Handbrake for the entire process I was averaging around 30 fps. But now I have all rips queued up and the first is doing around 10 fps! What's the deal? I figured it would be faster encoding from HD instead of DVD.
Also tried to encode Hunt for Red October and it says "Suspected RCE Region 1". Is there any way to remove the region from ripped file?
Hopefully someone has been through this before and can help me out.
Doctor Q
Apr 20, 07:04 PM
According to the timeline (http://terminator.wikia.com/wiki/Terminator:_The_Sarah_Connor_Chronicles_timeline) of The Sarah Connor Chronicles (http://en.wikipedia.org/wiki/Terminator:_The_Sarah_Connor_Chronicles), tomorrow is Judgment Day. :eek:
Yesterday, April 19, Skynet went online at 20:11. Tomorrow, April 21, Skynet will become self aware and attack us. We'll lose over a billion people but some of us will survive to fight back.
Even though the TV show was canceled, I haven't seen any notice that Judgment Day has been canceled, so I assume Skynet is now operating.
Who's ready for the battle? I'm arming myself with a pocket protector and an anti-static wrist band.
Yesterday, April 19, Skynet went online at 20:11. Tomorrow, April 21, Skynet will become self aware and attack us. We'll lose over a billion people but some of us will survive to fight back.
Even though the TV show was canceled, I haven't seen any notice that Judgment Day has been canceled, so I assume Skynet is now operating.
Who's ready for the battle? I'm arming myself with a pocket protector and an anti-static wrist band.
ownersbox
Sep 28, 10:47 PM
Did I read yours right? You ordered it Tuesday? do you mean the 23rd or 16th?
Also what are your specs?
I ordered mine this past Saturday and I'm so excitied, I have been waiting four weeks for a Dell and cancelled the order once I used the new ALbooks at the local store. You can't beat the edu discount
Also what are your specs?
I ordered mine this past Saturday and I'm so excitied, I have been waiting four weeks for a Dell and cancelled the order once I used the new ALbooks at the local store. You can't beat the edu discount
wurgi
Mar 24, 01:24 PM
The lineup in front of Eaton Centre has already started...
http://plixi.com/p/86520651
Makes me wonder if I should go somewhere else instead.
http://plixi.com/p/86520651
Makes me wonder if I should go somewhere else instead.
juliancs
May 23, 01:48 PM
deleted
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment